1. .For general chamfering and NC Spotdrill01ing.
   可廣泛應用於倒角加工及NC定點鑽。
2. The multi-edge design make it a cost-efficient solution- 4 times use.
   刀片可轉位四個角，減少刀具成本。
3. New spotting way, stable center spotting, improves tool life effectively.
   新形刀片定位方式刀片自我定中心、結合穩定，大幅延長刀具壽命。
4. New developed SH + ZrN coating increase the lubrication and lower
   the friction, improves tool performance effectively.
   新表面塗層SH+ZrN有效地增加了潤滑性並降低了摩擦，從而提高了刀具性能。
5. .Patent of Taiwan No.：M560955
   專利號：M560955

WARNING:
注意

1. Please use high rigidity machine and tool holder.
   請使用較具剛性之機械設備及夾頭。
2. Please adjust the Speed and Feed Rate if tool vibration happened on the low rigidity machine.
   機械設備或工件的夾持鋼性不足、出 現震動時，請以相同比例按右表降低回轉數及進給速度。
3. Recommend the maximum tool over length is 5D. Please adjust the
   parameters according to the actual situation.
   刀具夾持突出量以5D為基準，超出上 述場合時，請將切削條件做適度調整。